Galleon Technical Support
Windows 32 Bit. Stand Alone 95/98/NT4.x

Home | Overview | Time servers | Computer Time | CCTV | MSF Receivers |Digital Wall Clocks | FAQ | Atomic Clocks | MSF | WWVB | DCF | GPS | NTP | UTC | Technical Support | Site Map
Windows 32 Bit. Stand Alone 95/98/NT4.x

Connect the enclosed interface cable via the standard RJ45/Western type connector to the Atomic Radio Clock (ARC) clock and via the standard 9 pin interface connector to an unused port of your PC, usually marked COM1 � COM4.

To plug the 9 pin interface connector into a 25 pin serial port connector you will need a 9 to 25 pin adapter. Your dealer can usually supply one.

To connect your PC to your ARC clock YOU HAVE TO INSTALL THE Windows 95/98/NT4.x software drivers included on the supplied disk.

Please read all documentation and the README.TXT file which contains more information on installation and possible errors.

WINDOWS 95 / 98 NT4.x

To install the software DRIVERS FOR windows 95 /98 NT4.x, please proceed as follows :

Make sure all cables are properly connected and that your PC is turned on. Close all running programs, insert the driver disk into the 3.5� drive and execute the program� A:\SETUP.EXE.

To do so, click START in the task bar and choose, Run��. Then type in the command line a:\setup. Alternatively, you can execute SETUP.EXE also by double clicking the symbol ,,SETUP.EXE� in the corresponding Explorer window of drive A:

Let the set-up program guide you through the installation process.

Click here to go to the Galleon official UK website Galsys

Click here to go to the Galleon official US website NTP Time Server


Time Server - Rackmount time server products

NTP Server - Stand alone NTP Time Servers

Time Servers - Information Page

NTP Time Server - All NTP Server Products

Atomic clock - All Atomic clock Products

  • NTP server products
  • Windows NTP Time Server Products
  • Time server Solutions
  • Galleon Time Synchronisation Solutions


  • Atomic clock Galleon
  • Galleon's Time Synchronisation
  • Galleon Contact information


  • NTP Time Servers
  • Galleon's NTP Time Servers
  • Dedicated rackmount NTP time servers
  • AboutNTP
  • About NTP for Windows NT/2000/XP
  • NTP for Windows 2000/NT/XP

Telephone Galleon: 0121 608 7230 | International:+44 870 608 3615

Home | Correct time for computers | CCTV | OEM Modules | Product Finder | FAQ's | Contact |
© Galleon 2003